john.stainlessbarandwirecoStainless steel sheet
Stainless Steel Bar & Wire Company (SBW Co) a stockist and Indent supplier of Stainless Steel sheet, Plate, Strip & Coil.
Stainless steel sheet, strip and plate are specified to AISI grades to ASTM A240-480 with full traceability and Material Test Certificates.
Standard Stock range.
Stainless Bar & Wire stock list stainless steel Sheet.
| Grade | Thickness | Size | Finish | Kgs per sheet |
| 304L | 1.2 | 1219x 2438 | No4 LF | 29.16 |
| 304L | 1.2 | 1500X 3000 | No4 LF | 44.159 |
| 304L | 3 mm | 1219x 2438 | 2B LF | 72.91 |
| 304L | 1.2 | 1219 X 2000 | 2B LF | 23.92 |
| 304L | 5 mm | 1219 X 2438 | NO1 LF | 121.5 |
| 316L | 1.2 | 1219x 2438 | 2B LF | 29.16 |
| 316L | 1.5 mm | 1219 X 2438 | 2B LF | 36.45 |
| 316L | 1.2 | 1500X 3000 | 2B LF | 44.159 |
| 316L | 3 mm | 1219x 2438 | 2B LF | 72.91 |
| 316L | 1.2 | 1219 X 2000 | 2B LF | 23.92 |
| 316L | 5 mm | 1219 X 2438 | NO1 LF | 121.51 |
| 316L | 5 mm | 1500 X 3000 | NO1 LF | 183.99 |
| Grade | Thickness |
| 304L | 1.2 |
| 304L | 1.2 |
| 304L | 3 mm |
| 304L | 1.2 |
| 304L | 5 mm |
| 316L | 1.2 |
| 316L | 1.5 mm |
| 316L | 1.2 |
| 316L | 3 mm |
| 316L | 1.2 |
| 316L | 5 mm |
| 316L | 5 mm |
|
Size |
Finish |
|
1219x 2438 |
No4 LF |
|
1500X 3000 |
No4 LF |
|
1219x 2438 |
2B LF |
|
1219 X 2000 |
2B LF |
|
1219 X 2438 |
NO1 LF |
|
1219x 2438 |
2B LF |
|
1219 X 2438 |
2B LF |
|
1500X 3000 |
2B LF |
|
1219x 2438 |
2B LF |
|
1219 X 2000 |
2B LF |
|
1219 X 2438 |
NO1 LF |
|
1500 X 3000 |
NO1 LF |
|
Kgs per sheet |
|
29.16 |
|
44.159 |
|
72.91 |
|
23.92 |
|
121.5 |
|
29.16 |
|
36.45 |
|
44.159 |
|
72.91 |
|
23.92 |
|
121.51 |
|
183.99 |
Stainless steel 304 grade (18% chromium and 8% nickel) – 304 stainless steel is the general workhorse of stainless steel and is the most widely used grade due to its weld ability and resistance to a wide range of corrosive environments. However, 304 stainless steel does have a poor resistance to marine type environments.
316 grade (16% chromium, 10% nickel and 2% molybdenum) – Used in preference to Type 304 in marine or chemically exposed environments, 316 stainless steel is typically more resistant to solutions of sulfuric acid, chlorides, bromides, iodides, and fatty acids at high temperature.
Please note the above information is general in nature not only selecting the correct grade of material for your job is important, but to gain the best possible life cycle cost advantage of stainless steel you must regularly clean and maintain all surfaces also around welds, folds and crevices.
Grades 3CR12 and 400 series can be supplied via indent from overseas mills.
If you have variable demand or non-standard product needs SBW Co may be able to assist via the many mills, we have regular contact with.